| Mechanical &
Pumping |
110v Submersible
Pump 2" C/W Hose
Suitable for pumping clear clean water run by 110 volt
motor |
Petrol
Pump 2" C/W Hose
Suitable for clearing out foundations . Light
weight and portable |
| Puddle
Pump 1" C/W Hose
This pump will clear mater from a floor or
cutting down to within 3 mm of the ground |
3"
Diaphragm Pump Diesel C/W Hose
Suitable to pump water with 30% solids. This
diesel powered |
Pallet
Truck 2 Ton
Suitable to move pallets and heavy objets. This
machine needs a good solid and clean area to roll on |
Magnetic
Trolley
This a small pan with a long handle . You run
it around the floor like a vacuum and it will collect
all metal debris |
Tow Jack
This jack is designed to lift an object from
the side of the jack. There is no need to get the jack
underneath the object. It has a 5 ton capacity |
110v
Pipe Pressure Tester
This machine fills the pipe with water and then
provide the pressure required to test the pipe |
Hand Pipe
Pressure Tester
This machine is for use on 25mm copper pies
to 12mm copper pipes |
Moving
Skates C/W Handles
Suitable for the movement of heavy objects on
flat floor |
Sewer
Stops 4" - 15"
These are blank caps which stop the flow of
fluids to allow repair and maintenance to be carried out |
1"
Mono Pump / Oil Pump
This will transfer diesel oil from one drum
to another cleanly and quickly with no over spill |
Pipe Benders
Hand
This machine is for use with 15 mm and 2mm copper
only |
Pipe
Cutter 2" - 6"
For use on g.b pipes up to 6" |
Pipe Bench
C/W Vice
This machine will allow you to bend and cut
a length of pipe safely and with ease |
Pipe
Benders Conduit
This is for use on electrical trunking only |
Pipe Vice
This will allow safe and ease of work on length's
on pipes |
Bottle
Jack
Suitable for confined areas. A capacity of 5
to 10 ton is available |
Die Stock
This is handle which holds to threading dies
on pipe work |
| Dies
12mm -50mm |
Block
& Tackle 1 Ton - 5 Ton
These are the cutting dies used to thread pipes
for plumbing and electrical work |
